JZ356A DATA SHEET

Ports

2 HPE SmartRate RJ-45 port (maximum negotiated speed 5Gbps)

Mounting

Mounting bracket has been pre-installed on the back of the AP. This bracket is used to secure the AP to any of the Aruba mount kits (sold separately).

Input voltage

IEEE 802.3bt (class 5) or 802.3at PoE, or direct DC power (via optional power supply)

Power Consumption

POE powered (802.3bt or dual 802.3at): 38.2W POE powered (802.3at, IPM enabled): 25.1W DC powered: 38.5W

maximum (worst case)

Wi-Fi antenna

Mix of integrated downtilt omni-directional horizontally and vertically polarized antenna elements. Peak antenna gain of 4.3dBi (4x4 MIMO in 2.4GHz), and peak antenna gain of 5.8dBi (8x8 MIMO in 5GHz). In tri-radio mode, the peak gain of the antennas for each of the 4x4 5GHz radios is 5.5dBi (radio 0L, lower half of 5GHz) and 5.6dBi (radio 0U, upper half of 5GHz).

Radio coverage

Dual-radio (8x8 and 4x4 MIMO) IEEE 802.11ax AP with up-and downlink OFDMA and Multi-User MIMO (MU-MIMO). Optional tri-radio mode with two 5GHz and one 2.4GHz radio (all 4x4 MIMO). Maximum data rates of 4.8Gbps in the 5GHz band and 1,150Mbps in the 2.4GHz band (for an aggregate peak data rate of 5.95Gbps).

Product Dimensions (imperial)

2.3 x 10.2 x 10.2 in

Environmental Specifications

Operating conditions

Temperature

0C to +50C / +32F to +122F

Humidity

5% to 93% non-condensing

Storage and transportation conditions

Temperature

-40C to +70C / -40F to +158F

Humidity

5% to 93% non-condensing

Model

JZ356A

Q9H62A

SW type

Unified

Unified

Wi-Fi generation

802.11ax

802.11ax

Radio MIMO type

4x4:4 (2.4GHz)

8x8:8 or dual 4x4:4 (5GHz)

2x2:2 (2.4GHz)

4x4:4 (5GHz)

Supported bandwidths

20/40 (2.4GHz)

20/40/80/160 (5GHz)

20/40 (2.4GHz)

20/40/80/160 (5GHz)

Highest order modulation

1024-QAM

1024-QAM

Integrated antennas

12x omni downtilt

6x omni downtilt (AP-515)